DF357
Gelande snow groomer
1 Easy Usage of Truly Necessary Functions
DEER FORTE 357 was developed focusing on the starting point “Easy usage of truly necessary functions.”
2 High Operability
Meters and indicators are conveniently located and readily visible. All switches and levers are laid out considering their functions and frequency of use to pursuit operability and to prevent operator fatigue.
3 Caterpillar C9 Engine
DEER FORTE 357 is equipped with Caterpillar C9 engine which meets Tier 3 regulation. With new hydraulic systems it has higher climbing ability and snow-pushing capacity.
| DF-357 | |||
|---|---|---|---|
| Measurement (mm) | Length | Vehicle Body | 4630 |
| With Front and Back Operating Equipment | 8475 | ||
| Width | Vehicle Body | 4160 | |
| With Snow Removal Blade | 5110 | ||
| With Flex Rotor | 5330 | ||
| Height | Cabin Upper Parts | 2650 | |
| Search Light Upper Part | 2840 | ||
| During Cabin Tilt | 3200 | ||
| Carrier | Length | 1050 | |
| Width | 2000 | ||
| Height | 1170 | ||
| Minimum Ground Clearance | 400 | ||
| Tread（Windage knob center distance） | 2302 | ||
| Track Width | 1655 | ||
| Weight（kg） | Vehicle Body mass | 7300 | |
| Working equipments (blade, tiller) | 2000 | ||
| Gross vehicle mass (oil, fuel included) | 9300 | ||
| Ground Contact Pressure Mpa（kg/cm²） | 0.0064（0.065） | ||
| Engine | Name | CAT C9 | |
| Model | ４Cycle、Water-Cooled、Direct InjectionDiesel Engine（Exhaust Turbo-supercharger with Air Cooler） | ||
| Engine capacity（L） | 8.8 | ||
| Maximum Output kW（pS）/rpm | 242（329）/1800～2200 | ||
| Maximum Torque Nm（kgf・m）/rpm | 1485（152）/1400 | ||
| Starter（V-Kw） | 24-7.5 | ||
| Alternator（V-A） | 24-95 | ||
| Fuel Tank Capacity（L） | 260 | ||
| Battery（V-Ah） | 12-140 Phase×2 | ||
| Power Transmission System | Drive System | Hydrostatic Transmission | |
| Steering Handle | Electronic Control 2-Lever Type、Electronic Control Circle Type | ||
| Brake | Main Brake | Hydrostatic Brake | |
| Parking Brake | Multi-plate Hydraulic Disk Brake | ||
| Performance | Running Speed（km/h） | 0～20（Single Step） | |
| Maximum Work Capacity（m²/h） | 106600 | ||
| Hill Climbing Capacity | 100％、45°（Depends on road surface adhesion) | ||
| Minimum Turning Radius（m） | 0（Pivot Turn） | ||
- Contents of this data are as at March 2012.
- Due to product improvement, specification may change without notice.
- The japanese notation of DF357 is DF350.
